Description
Boss Low Density Fast Filler is an easy-to-use general-purpose painter’s filler. The non-toxic single pack formula is environmentally friendly and makes it ideal for use in residential applications. Suitable for filling holes and imperfections in a variety of interior applications.
Features:
- Light weight and low density
- Fast dry and non shrinking
- Interior only
- Paintable and stainable
- Excellent adhesion to a variety of substrates
- Super smooth finish and minimal slumping
- Long-lasting resistance to mildew and organic growth
- Easy sanding and excellent faring properties
- Minimal flashing
- Clean up with water
Substrate Preparation:
All substrates must be dry and free from dust, dirt, mold and other contaminants which may affect adhesion. Exterior timber and fibre cement cavities should be primed prior to filling for best results. Concrete cavities should be sealed prior to filling with a quality concrete sealer to prevent efflorescence and lime leaching.
Directions for Use:
Apply Boss Low Density Fast Filler with a narrow filling blade. Take care to leave minimal excess filler around the hole and allow to dry. Ensure full cure has been reached prior to sanding and painting. Sand with 180 grit or finer sandpaper, remove dust, and prime with a quality water or oil based primer undercoat followed by a quality top coat. Do not allow prolonged exposure to sun or rain.
Recommended Primers and Undercoats:
- Glawesome 4150 interior acrylic primer undercoat
- Legacy 3300 exterior acrylic primer undercoat
- Legacy 4950 oil based primer undercoat
Applications:
Fills holes and imperfections in –
- Timber trim, architraves, windows and door frames
- MDF and wood based composites
- Concrete blocks, stucco and masonry
Limitations:
- Boss Low Density Fast Filler should not be subjected to prolonged exposure to rain or sun. Apply a high-quality paint as soon as practicable after curing.
- Not suitable for use with substrates which are permanently wet or subject to regular saturation.
- Fill larger holes by applying filler in multiple layers, allowing filler to cure between applications.
Safety and Storage:
- Keep contents out of reach of children.
- Store in a cool dry place out of direct sunlight for prolonged shelf life
- Content is non-hazardous and non-toxic.
- Dispose of empty container responsibly
Low Density Fast Filler and the Boss Fillers range is available from the following stockists:
